PDA

View Full Version : Modded bios για την MSI K7N2 Delta ILSR


maddoctor
01-10-2004, 12:32
Βρήκα σε ένα site (http://planeta.terra.com.br/informatica/braziliantech/downloads_en.html) κάτι ειδικά τροποποιημένα bios για την μητρική μου και είπα να τα πω και εδώ.Δεν τα έχω βάλει ακόμα,γιατί μόλις τα βρήκα.Έτσι έχουμε και λέμε:
* MSI K7N2 Delta ILSR v7.7 (http://planeta.terra.com.br/informatica/braziliantech/downloads/bios/k7n2delta-ilsr/6570v77.zip) (05/27/2004)
- Even more selectable VCore settings.
- Corrects VCore configuration table

*MSI K7N2 Delta-ILSR (Full RAID) (http://planeta.terra.com.br/informatica/braziliantech/downloads/bios/k7n2delta-ilsr/6570v77_fullraid.zip) (05/27/2004)
- Even more selectable VCore settings.
- Corrects VCore configuration table.
- Includes Promise S150 TX2Plus BIOS with Full RAID support

*Promise FastTrak 376 drivers for MSI K7N2 Delta-ILSR (Standard and Full RAID) (http://planeta.terra.com.br/informatica/braziliantech/downloads/bios/k7n2delta-ilsr/sata376raid.zip)
- Latest version
- For Windows9x/ME, Windows NT4 and Windows 2000 / XP / Server 2003 (*)
(*) WHQL certified.

Υπόψιν τα δοκιμάζεται με δικιά σας ευθύνη

maddoctor
04-10-2004, 17:38
Έβαλα το bios στην μητρική (αυτό με το full raid) και δουλεύει μια χαρά!.Μάλιστα θα έλεγα ότι έχει περισσότερες επιλογές πια στο bios και σαν να πηγαίνειμ πιο γρήγορα και πιο ομαλά ο SATA σκληρός που έχω..... :023:

varelasj
15-10-2004, 08:35
Εγω οταν ειχα στο 1ο pc την msi k7n2 delta -L ειχα βαλει πανω ενα moded bios και μπορουσα να δωσω vdim max 2.8V αντι για 2,7! Για παραπανω στην msi θελει mod στο psu αλλα πριν το κανω την ειχα παει rma και με αυτη που εχω τωρα δεν ψαχτηκα και πολυ!

maddoctor
15-03-2005, 16:36
Βρήκα 2 modded bios για την μητρική μου που έχουν το εξής κείμενο.Αυτό που θέλω να ρωτήσω εάν υπάρχει κάποια ουσιαστική διαφορά ανάμεσα στα 2 γιατί δεν βρίσκω και ποιο θα ήταν καλύτερα να βάλω (δεν έχω raid στο σύστημά μου, ένα SATA και ένα IDE σκληρό έχω).

MSI K7N2 delta ILSR

Content::
Full RAID BIOS file: W6570F78.bin
18.02.05

!! This file has the potential to destroy your motherboard, controller or other hardware when used incorrect. Make sure to check your requirements and knowledge. If you have any doubts or risk seems to be too high DO NOT DOWNLOAD OR USE this file. Use it only on your own risk. !

Description of MSI BIOS:
"Version 7.8 Update date 2004/08/06

Update Description
- Support Sempron CPU.
- Fix the yellow mark on device manager under Win2000 without PS2 devices installed"

The SATA RAID rom was cexhanged for Full RAID SATA rom 1.00.0.37. This will enable four harddisks at the onboard SATA controller and RAID-0, RAID-1 and RAID-10.
Latest SATA RAID driver are available at Storage & RAID Forum - download-section:
http://web21.p15131386.pureserver.info/index.php?url=&cid=12
A test version of the driver 1.64.1.17 (better than 1.00.0.37) is available at:
http://storage-raid-forum.de/viewtopic.php?t=2369

Changed BIOS Options:

Item "CPU Internal Cache" activated
Item "Seek Floppy" default setting is "Disabled"
Item "Hard Disk S.M.A.R.T." default setting is "Enabled"
Item "Small Logo(EPA) Show" activated
Item "Super Stability Mode" activated
Item "T-(RAS)" setting "0" selectable
Item "CAS Latency" setting "Auto" selectable
Item "AGP Spread Spectrum" setting "1%" selectable
Item COM2 changed -> "Onboard IrDA Connector" and activated,
default setting is "2F8/IRQ3" , settings "2F8/IRQ3" and "2E8/IRQ3" selectable
Item "Onboard SATA" activated
Item "IPCA" activated
Item "Sleep State" default setting is "S3(STR)"
Item "Power Management" default setting is "Disabled" *
Item "Power Status Led" activated
Item "Shutdown Temperatur" activated, default setting is "65°C/149°F"
Item "DRAM Voltage Adjust" setting "2.8 V" selectable

Item "AGP Voltage Adjust" setting "1.8V" selectable
Item "CPU Vcore Select" settings "1.300V", "1.425V", "1.450V", "1.475V", "1.500V", "1.525V", "1.550V, 1.750V, 1.775V, 1.800V" selectable

changed Epa Logo και
MSI K7N2 delta ILSR

Content::
UDMA BIOS file: W6570U78.bin
18.02.05

!! This file has the potential to destroy your motherboard, controller or other hardware when used incorrect. Make sure to check your requirements and knowledge. If you have any doubts or risk seems to be too high DO NOT DOWNLOAD OR USE this file. Use it only on your own risk. !

Description of MSI BIOS:
"Version 7.8 Update date 2004/08/06

Update Description
- Support Sempron CPU.
- Fix the yellow mark on device manager under Win2000 without PS2 devices installed"

The SATA RAID rom was changed with UDMA SATA Rom 1.0.00.34 (without RAID Features).
Promise:
"Description Fixes problem where drives are sometimes not detected by the SATA150 TX BIOS"
This BIOS will only work with UDMA driver !!
Latest UDMA Windows driver (1.00.0.16) are available at Storage & RAID Forum - Download: http://web21.p15131386.pureserver.info/index.php?url=&cid=12
Changed BIOS Options:

Item "CPU Internal Cache" activated
Item "Seek Floppy" default setting is "Disabled"
Item "Hard Disk S.M.A.R.T." default setting is "Enabled"
Item "Small Logo(EPA) Show" activated
Item "Super Stability Mode" activated
Item "T-(RAS)" setting "0" selectable
Item "CAS Latency" setting "Auto" selectable
Item "AGP Spread Spectrum" setting "1%" selectable
Item COM2 changed -> "Onboard IrDA Connector" and activated,
default setting is "2F8/IRQ3" , settings "2F8/IRQ3" and "2E8/IRQ3" selectable
Item "Onboard SATA" activated
Item "IPCA" activated
Item "Sleep State" default setting is "S3(STR)"
Item "Power Management" default setting is "Disabled" *
Item "Power Status Led" activated
Item "Shutdown Temperatur" activated, default setting is "65°C/149°F"
Item "DRAM Voltage Adjust" setting "2.8 V" selectable

Item "AGP Voltage Adjust" setting "1.8V" selectable
Item "CPU Vcore Select" settings "1.300V", "1.425V", "1.450V", "1.475V", "1.500V", "1.525V", "1.550V, 1.750V, 1.775V, 1.800V" selectable

changed Epa Logo