stelios_lavdedin
22-11-2008, 15:18
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:20 UTC 2008 (Ubuntu 2.6.27-7.16-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfc6c000 (usable)
[ 0.000000] BIOS-e820: 00000000bfc6c000 - 00000000bfcbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd83000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd83000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfde8000 (usable)
[ 0.000000] BIOS-e820: 00000000bfde8000 - 00000000bfdff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 7f7e6000 - 7ffef073
[ 0.000000] Allocated new RAMDISK: 005c4000 - 00dcd073
[ 0.000000] Move RAMDISK from 000000007f7e6000 - 000000007ffef072 to 005c4000 - 00dcd072
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT BFDFE120, 006C (r1 HPQOEM SLIC-MPC 1 1000013)
[ 0.000000] ACPI: FACP BFDFC000, 00F4 (r4 HP VADER 1 MSFT 1000013)
[ 0.000000] ACPI: DSDT BFDED000, A54F (r1 HP VADER 1 MSFT 1000013)
[ 0.000000] ACPI: FACS BFD8C000, 0040
[ 0.000000] ACPI: SSDT BFDFD000, 0655 (r1 PmRef CpuPm 3000 INTL 20060912)
[ 0.000000] ACPI: HPET BFDFB000, 0038 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: APIC BFDFA000, 006C (r2 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: MCFG BFDF9000, 003C (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: ASF! BFDF8000, 00A5 (r32 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: SLIC BFDEC000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR F4240)
[ 0.000000] ACPI: BOOT BFDEB000, 0028 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: SSDT BFDEA000, 0296 (r1 INTEL SataAhci 1000 INTL 20060912)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00005c4000 - 0000dcd073] NEW RAMDISK ==> [00005c4000 - 0000dcd073]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x000bfe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bfc6c
[ 0.000000] 0: 0x000bfcbf -> 0x000bfd83
[ 0.000000] 0: 0x000bfdbf -> 0x000bfde8
[ 0.000000] 0: 0x000bfdff -> 0x000bfe00
[ 0.000000] On node 0 totalpages: 785656
[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 551486 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778748
[ 0.000000] Kernel command line: root=UUID=2F9D15943696EE6B loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 1994.303 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 3099844k/3143680k available (2572k kernel code, 41820k reserved, 1160k data, 424k init, 2225512k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc03832aa - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03832aa (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.60 BogoMIPS (lpj=7977212)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.020004] ACPI: Core revision 20080609
[ 0.028400] ACPI: Checking initramfs for custom DSDT
[ 0.816247] ENABLING IO-APIC IRQs
[ 0.816425] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.856232] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
[ 0.860031] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3989.98 BogoMIPS (lpj=7979964)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.944651] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
[ 0.944667] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.948049] Brought up 2 CPUs
[ 0.948052] Total of 2 processors activated (7978.58 BogoMIPS).
[ 0.948072] CPU0 attaching sched-domain:
[ 0.948075] domain 0: span 0-1 level MC
[ 0.948077] groups: 0 1
[ 0.948083] CPU1 attaching sched-domain:
[ 0.948085] domain 0: span 0-1 level MC
[ 0.948087] groups: 1 0
[ 0.948159] net_namespace: 840 bytes
[ 0.948159] Booting paravirtualized kernel on bare hardware
[ 0.948278] Time: 14:16:16 Date: 11/22/08
[ 0.948303] NET: Registered protocol family 16
[ 0.948321] EISA bus registered
[ 0.948321] ACPI: bus type pci registered
[ 0.948321] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.948321] PCI: MCFG area at f8000000 reserved in E820
[ 0.948321] PCI: Using MMCONFIG for extended config space
[ 0.948321] PCI: Using configuration type 1 for base access
[ 0.952072] ACPI: EC: Look up EC in DSDT
[ 1.004480] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 1.011588] ACPI: Interpreter enabled
[ 1.011591] ACPI: (supports S0 S3 S4 S5)
[ 1.011612] ACPI: Using IOAPIC for interrupt routing
[ 1.012047] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.324216] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.324219] ACPI: EC: driver started in interrupt mode
[ 1.324253] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.324253] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.324253] pci 0000:00:01.0: PME# disabled
[ 1.324253] PCI: 0000:00:1a.0 reg 20 io port: [90e0, 90ff]
[ 1.324336] PCI: 0000:00:1a.1 reg 20 io port: [90c0, 90df]
[ 1.324437] PCI: 0000:00:1a.7 reg 10 32bit mmio: [df304c00, df304fff]
[ 1.324500] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.324505] pci 0000:00:1a.7: PME# disabled
[ 1.324608] PCI: 0000:00:1b.0 reg 10 64bit mmio: [df300000, df303fff]
[ 1.324690] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.324695] pci 0000:00:1b.0: PME# disabled
[ 1.324755] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.324760] pci 0000:00:1c.0: PME# disabled
[ 1.324819] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.324824] pci 0000:00:1c.1: PME# disabled
[ 1.324889] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.324894] pci 0000:00:1c.2: PME# disabled
[ 1.324961] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.324966] pci 0000:00:1c.3: PME# disabled
[ 1.325033] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.325038] pci 0000:00:1c.4: PME# disabled
[ 1.325102] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.325106] pci 0000:00:1c.5: PME# disabled
[ 1.325185] PCI: 0000:00:1d.0 reg 20 io port: [90a0, 90bf]
[ 1.325298] PCI: 0000:00:1d.1 reg 20 io port: [9080, 909f]
[ 1.325403] PCI: 0000:00:1d.2 reg 20 io port: [9060, 907f]
[ 1.325507] PCI: 0000:00:1d.3 reg 20 io port: [9040, 905f]
[ 1.325604] PCI: 0000:00:1d.7 reg 10 32bit mmio: [df304800, df304bff]
[ 1.325666] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.325671] pci 0000:00:1d.7: PME# disabled
[ 1.325864] PCI: 0000:00:1f.2 reg 10 io port: [9108, 910f]
[ 1.325871] PCI: 0000:00:1f.2 reg 14 io port: [9114, 9117]
[ 1.325879] PCI: 0000:00:1f.2 reg 18 io port: [9100, 9107]
[ 1.325886] PCI: 0000:00:1f.2 reg 1c io port: [9110, 9113]
[ 1.325893] PCI: 0000:00:1f.2 reg 20 io port: [9020, 903f]
[ 1.325900] PCI: 0000:00:1f.2 reg 24 32bit mmio: [df304000, df3047ff]
[ 1.325932] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.325937] pci 0000:00:1f.2: PME# disabled
[ 1.325962] PCI: 0000:00:1f.3 reg 10 64bit mmio: [df305000, df3050ff]
[ 1.325980] PCI: 0000:00:1f.3 reg 20 io port: [9000, 901f]
[ 1.326106] PCI: 0000:01:00.0 reg 10 32bit mmio: [d2000000, d2ffffff]
[ 1.326127] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, cfffffff]
[ 1.326186] PCI: 0000:01:00.0 reg 1c 64bit mmio: [d0000000, d1ffffff]
[ 1.326208] PCI: 0000:01:00.0 reg 24 io port: [8000, 807f]
[ 1.326235] PCI: 0000:01:00.0 reg 30 32bit mmio: [fff80000, ffffffff]
[ 1.326348] PCI: bridge 0000:00:01.0 io port: [8000, 8fff]
[ 1.326352] PCI: bridge 0000:00:01.0 32bit mmio: [d0000000, d2ffffff]
[ 1.326356] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
[ 1.326466] PCI: 0000:02:00.0 reg 10 64bit mmio: [de200000, de201fff]
[ 1.326564] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.326575] pci 0000:02:00.0: PME# disabled
[ 1.326625] PCI: bridge 0000:00:1c.0 io port: [7000, 7fff]
[ 1.326629] PCI: bridge 0000:00:1c.0 32bit mmio: [de200000, df2fffff]
[ 1.326637] PCI: bridge 0000:00:1c.0 64bit mmio pref: [d3000000, d3ffffff]
[ 1.326695] PCI: bridge 0000:00:1c.1 io port: [6000, 6fff]
[ 1.326699] PCI: bridge 0000:00:1c.1 32bit mmio: [dd200000, de1fffff]
[ 1.326706] PCI: bridge 0000:00:1c.1 64bit mmio pref: [d4000000, d4ffffff]
[ 1.326762] PCI: bridge 0000:00:1c.2 io port: [5000, 5fff]
[ 1.326767] PCI: bridge 0000:00:1c.2 32bit mmio: [dc200000, dd1fffff]
[ 1.326774] PCI: bridge 0000:00:1c.2 64bit mmio pref: [d5000000, d5ffffff]
[ 1.326833] PCI: 0000:05:00.0 reg 10 io port: [3000, 30ff]
[ 1.326850] PCI: 0000:05:00.0 reg 18 32bit mmio: [d6010000, d6010fff]
[ 1.326869] PCI: 0000:05:00.0 reg 20 32bit mmio: [d6000000, d600ffff]
[ 1.326885] PCI: 0000:05:00.0 reg 30 32bit mmio: [ffff0000, ffffffff]
[ 1.326922] pci 0000:05:00.0: supports D1
[ 1.326924] pci 0000:05:00.0: supports D2
[ 1.326926] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.326932] pci 0000:05:00.0: PME# disabled
[ 1.326980] PCI: bridge 0000:00:1c.3 io port: [3000, 4fff]
[ 1.326985] PCI: bridge 0000:00:1c.3 32bit mmio: [db200000, dc1fffff]
[ 1.326992] PCI: bridge 0000:00:1c.3 64bit mmio pref: [d6000000, d70fffff]
[ 1.327054] PCI: 0000:06:00.0 reg 10 32bit mmio: [da100000, da1007ff]
[ 1.327066] PCI: 0000:06:00.0 reg 14 32bit mmio: [da100d00, da100d7f]
[ 1.327098] PCI: 0000:06:00.0 reg 20 32bit mmio: [da100c80, da100cff]
[ 1.327111] PCI: 0000:06:00.0 reg 24 32bit mmio: [da100c00, da100c7f]
[ 1.327202] PCI: 0000:06:00.1 reg 10 32bit mmio: [da100b00, da100bff]
[ 1.327330] PCI: 0000:06:00.2 reg 10 32bit mmio: [da100a00, da100aff]
[ 1.327458] PCI: 0000:06:00.3 reg 10 32bit mmio: [da100900, da1009ff]
[ 1.327587] PCI: 0000:06:00.4 reg 10 32bit mmio: [da100800, da1008ff]
[ 1.327725] PCI: bridge 0000:00:1c.4 io port: [2000, 2fff]
[ 1.327730] PCI: bridge 0000:00:1c.4 32bit mmio: [da100000, db1fffff]
[ 1.328038] PCI: bridge 0000:00:1c.4 64bit mmio pref: [d7100000, d80fffff]
[ 1.328096] PCI: bridge 0000:00:1c.5 io port: [1000, 1fff]
[ 1.328101] PCI: bridge 0000:00:1c.5 32bit mmio: [d9100000, da0fffff]
[ 1.328107] PCI: bridge 0000:00:1c.5 64bit mmio pref: [d8100000, d90fffff]
[ 1.328167] pci 0000:00:1e.0: transparent bridge
[ 1.328224] bus 00 -> node 0
[ 1.328235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.328845] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 1.329092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 1.329309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 1.329521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 1.329733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 1.329949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 1.330182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[ 1.336375] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.336375] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 1.336506] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.336679] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.336852] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.337024] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.337196] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 1.340155] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 1.344176] ACPI: Power Resource [FN00] (on)
[ 1.344228] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.344240] pnp: PnP ACPI init
[ 1.344240] ACPI: bus type pnp registered
[ 1.460701] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 7 (0x1000-0x1fff), disabling
[ 1.460771] pnp: PnP ACPI: found 11 devices
[ 1.460771] ACPI: ACPI bus type pnp unregistered
[ 1.460771] PnPBIOS: Disabled by ACPI PNP
[ 1.460771] PCI: Using ACPI for IRQ routing
[ 1.468039] NET: Registered protocol family 8
[ 1.468042] NET: Registered protocol family 20
[ 1.468056] NetLabel: Initializing
[ 1.468056] NetLabel: domain hash size = 128
[ 1.468056] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.468061] NetLabel: unlabeled traffic allowed by default
[ 1.468068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.468073] hpet0: 4 64-bit timers, 14318180 Hz
[ 1.469951] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 1.469954] actual entries 65620
[ 1.470025] AppArmor: AppArmor Filesystem Enabled
[ 1.470047] ACPI: RTC can wake from S4
[ 1.472038] Switched to high resolution mode on CPU 0
[ 1.472676] Switched to high resolution mode on CPU 1
[ 1.476021] system 00:01: ioport range 0x600-0x60f has been reserved
[ 1.476024] system 00:01: ioport range 0x610-0x610 has been reserved
[ 1.476027] system 00:01: ioport range 0x800-0x80f has been reserved
[ 1.476030] system 00:01: ioport range 0x810-0x817 has been reserved
[ 1.476032] system 00:01: ioport range 0x820-0x823 has been reserved
[ 1.476035] system 00:01: ioport range 0x400-0x47f has been reserved
[ 1.476038] system 00:01: ioport range 0x500-0x53f has been reserved
[ 1.476041] system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
[ 1.476045] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 1.476048] system 00:01: iomem range 0xfed10000-0xfed13fff could not be reserved
[ 1.476051] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 1.476054] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 1.476057] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.476060] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 1.476064] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 1.511178] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 1.511181] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.511184] pci 0000:00:01.0: IO window: 0x8000-0x8fff
[ 1.511188] pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff
[ 1.511191] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 1.511196] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.511199] pci 0000:00:1c.0: IO window: 0x7000-0x7fff
[ 1.511205] pci 0000:00:1c.0: MEM window: 0xde200000-0xdf2fffff
[ 1.511210] pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d3ffffff
[ 1.511218] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 1.511221] pci 0000:00:1c.1: IO window: 0x6000-0x6fff
[ 1.511227] pci 0000:00:1c.1: MEM window: 0xdd200000-0xde1fffff
[ 1.511231] pci 0000:00:1c.1: PREFETCH window: 0x000000d4000000-0x000000d4ffffff
[ 1.511239] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 1.511242] pci 0000:00:1c.2: IO window: 0x5000-0x5fff
[ 1.511248] pci 0000:00:1c.2: MEM window: 0xdc200000-0xdd1fffff
[ 1.511253] pci 0000:00:1c.2: PREFETCH window: 0x000000d5000000-0x000000d5ffffff
[ 1.511262] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 1.511265] pci 0000:00:1c.3: IO window: 0x3000-0x4fff
[ 1.511271] pci 0000:00:1c.3: MEM window: 0xdb200000-0xdc1fffff
[ 1.511275] pci 0000:00:1c.3: PREFETCH window: 0x000000d6000000-0x000000d70fffff
[ 1.511283] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 1.511286] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
[ 1.511293] pci 0000:00:1c.4: MEM window: 0xda100000-0xdb1fffff
[ 1.511297] pci 0000:00:1c.4: PREFETCH window: 0x000000d7100000-0x000000d80fffff
[ 1.511305] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[ 1.511308] pci 0000:00:1c.5: IO window: 0x1000-0x1fff
[ 1.511314] pci 0000:00:1c.5: MEM window: 0xd9100000-0xda0fffff
[ 1.511319] pci 0000:00:1c.5: PREFETCH window: 0x000000d8100000-0x000000d90fffff
[ 1.511327] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 1.511329] pci 0000:00:1e.0: IO window: disabled
[ 1.511334] pci 0000:00:1e.0: MEM window: disabled
[ 1.511338] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.511352] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.511356] pci 0000:00:01.0: setting latency timer to 64
[ 1.511364] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.511369] pci 0000:00:1c.0: setting latency timer to 64
[ 1.511377] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 1.511381] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.511387] pci 0000:00:1c.1: setting latency timer to 64
[ 1.511395] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 1.511399] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.511405] pci 0000:00:1c.2: setting latency timer to 64
[ 1.511414] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.511418] pci 0000:00:1c.3: setting latency timer to 64
[ 1.511426] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.511431] pci 0000:00:1c.4: setting latency timer to 64
[ 1.511439] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[ 1.511442] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.511448] pci 0000:00:1c.5: setting latency timer to 64
[ 1.511455] pci 0000:00:1e.0: setting latency timer to 64
[ 1.511459] bus: 00 index 0 io port: [0, ffff]
[ 1.511461] bus: 00 index 1 mmio: [0, ffffffff]
[ 1.511463] bus: 01 index 0 io port: [8000, 8fff]
[ 1.511465] bus: 01 index 1 mmio: [d0000000, d2ffffff]
[ 1.511467] bus: 01 index 2 mmio: [c0000000, cfffffff]
[ 1.511469] bus: 01 index 3 mmio: [0, 0]
[ 1.511471] bus: 02 index 0 io port: [7000, 7fff]
[ 1.511473] bus: 02 index 1 mmio: [de200000, df2fffff]
[ 1.511475] bus: 02 index 2 mmio: [d3000000, d3ffffff]
[ 1.511477] bus: 02 index 3 mmio: [0, 0]
[ 1.511479] bus: 03 index 0 io port: [6000, 6fff]
[ 1.511481] bus: 03 index 1 mmio: [dd200000, de1fffff]
[ 1.511483] bus: 03 index 2 mmio: [d4000000, d4ffffff]
[ 1.511485] bus: 03 index 3 mmio: [0, 0]
[ 1.511487] bus: 04 index 0 io port: [5000, 5fff]
[ 1.511489] bus: 04 index 1 mmio: [dc200000, dd1fffff]
[ 1.511491] bus: 04 index 2 mmio: [d5000000, d5ffffff]
[ 1.511493] bus: 04 index 3 mmio: [0, 0]
[ 1.511494] bus: 05 index 0 io port: [3000, 4fff]
[ 1.511497] bus: 05 index 1 mmio: [db200000, dc1fffff]
[ 1.511498] bus: 05 index 2 mmio: [d6000000, d70fffff]
[ 1.511500] bus: 05 index 3 mmio: [0, 0]
[ 1.511502] bus: 06 index 0 io port: [2000, 2fff]
[ 1.511504] bus: 06 index 1 mmio: [da100000, db1fffff]
[ 1.511506] bus: 06 index 2 mmio: [d7100000, d80fffff]
[ 1.511508] bus: 06 index 3 mmio: [0, 0]
[ 1.511510] bus: 07 index 0 io port: [1000, 1fff]
[ 1.511512] bus: 07 index 1 mmio: [d9100000, da0fffff]
[ 1.511514] bus: 07 index 2 mmio: [d8100000, d90fffff]
[ 1.511516] bus: 07 index 3 mmio: [0, 0]
[ 1.511518] bus: 0a index 0 mmio: [0, 0]
[ 1.511520] bus: 0a index 1 mmio: [0, 0]
[ 1.511522] bus: 0a index 2 mmio: [0, 0]
[ 1.511523] bus: 0a index 3 io port: [0, ffff]
[ 1.511525] bus: 0a index 4 mmio: [0, ffffffff]
[ 1.511533] NET: Registered protocol family 2
[ 1.524051] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.524256] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.524546] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.524700] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.524704] TCP reno registered
[ 1.532066] NET: Registered protocol family 1
[ 1.532167] checking if image is initramfs... it is
[ 2.246949] Freeing initrd memory: 8228k freed
[ 2.247262] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 2.247264] Simple Boot Flag at 0x44 set to 0x1
[ 2.248007] audit: initializing netlink socket (disabled)
[ 2.248028] type=2000 audit(1227363376.244:1): initialized
[ 2.254068] highmem bounce pool size: 64 pages
[ 2.254075] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.256286] VFS: Disk quotas dquot_6.5.1
[ 2.256370] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.256472] msgmni has been set to 1725
[ 2.256595] io scheduler noop registered
[ 2.256597] io scheduler anticipatory registered
[ 2.256600] io scheduler deadline registered
[ 2.256611] io scheduler cfq registered (default)
[ 10.256012] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 18.256012] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 18.256191] pci 0000:01:00.0: Boot video device
[ 18.256316] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 18.256350] pcieport-driver 0000:00:01.0: found MSI capability
[ 18.256378] pci_express 0000:00:01.0:pcie00: allocate port service
[ 18.256419] pci_express 0000:00:01.0:pcie02: allocate port service
[ 18.256458] pci_express 0000:00:01.0:pcie03: allocate port service
[ 18.256546] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 18.256594] pcieport-driver 0000:00:1c.0: found MSI capability
[ 18.256640] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 18.256678] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 18.256716] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 18.256827] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 18.256874] pcieport-driver 0000:00:1c.1: found MSI capability
[ 18.256921] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 18.256961] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 18.256999] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 18.257106] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 18.257154] pcieport-driver 0000:00:1c.2: found MSI capability
[ 18.257200] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 18.257239] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 18.257277] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 18.257384] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 18.257431] pcieport-driver 0000:00:1c.3: found MSI capability
[ 18.257477] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 18.257516] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 18.257554] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 18.257662] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 18.257710] pcieport-driver 0000:00:1c.4: found MSI capability
[ 18.257756] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 18.257796] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 18.257834] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 18.257945] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 18.257993] pcieport-driver 0000:00:1c.5: found MSI capability
[ 18.258038] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 18.258078] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 18.258117] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 18.258459] isapnp: Scanning for PnP cards...
[ 18.614202] isapnp: No Plug & Play device found
[ 18.645252] hpet_resources: 0xfed00000 is busy
[ 18.645335] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 18.647394] brd: module loaded
[ 18.647457] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.647569] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 18.702850] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.702856] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.703056] mice: PS/2 mouse device common for all mice
[ 18.705088] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 18.705116] rtc0: alarms up to one month, hpet irqs
[ 18.705245] EISA: Probing bus 0 at eisa.0
[ 18.705251] Cannot allocate resource for EISA slot 1
[ 18.705253] Cannot allocate resource for EISA slot 2
[ 18.705255] Cannot allocate resource for EISA slot 3
[ 18.705257] Cannot allocate resource for EISA slot 4
[ 18.705259] Cannot allocate resource for EISA slot 5
[ 18.705261] Cannot allocate resource for EISA slot 6
[ 18.705263] Cannot allocate resource for EISA slot 7
[ 18.705265] Cannot allocate resource for EISA slot 8
[ 18.705267] EISA: Detected 0 cards.
[ 18.705270] cpuidle: using governor ladder
[ 18.705273] cpuidle: using governor menu
[ 18.705749] TCP cubic registered
[ 18.705773] Using IPI No-Shortcut mode
[ 18.705934] registered taskstats version 1
[ 18.706077] Magic number: 0:887:283
[ 18.706089] tty ttyve: hash matches
[ 18.706158] rtc_cmos 00:03: setting system clock to 2008-11-22 14:16:33 UTC (1227363393)
[ 18.706161] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.706163] EDD information not available.
[ 18.706361] Freeing unused kernel memory: 424k freed
[ 18.706398] Write protecting the kernel text: 2576k
[ 18.706423] Write protecting the kernel read-only data: 936k
[ 18.745498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 18.868550] fuse init (API version 7.9)
[ 18.929689] fan PNP0C0B:00: registered as cooling_device0
[ 18.929696] ACPI: Fan [FAN] (on)
[ 18.946630] ACPI: SSDT BFC77C98, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20060912)
[ 18.947179] ACPI: SSDT BFC75618, 0594 (r1 PmRef Cpu0Cst 3001 INTL 20060912)
[ 18.966146] Monitor-Mwait will be used to enter C-1 state
[ 18.966149] Monitor-Mwait will be used to enter C-2 state
[ 18.966152] Monitor-Mwait will be used to enter C-3 state
[ 18.986319] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 18.986366] processor ACPI0007:00: registered as cooling_device1
[ 18.986370] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 18.986877] ACPI: SSDT BFC76E18, 01CF (r1 PmRef ApIst 3000 INTL 20060912)
[ 18.987447] ACPI: SSDT BFC77F18, 008D (r1 PmRef ApCst 3000 INTL 20060912)
[ 18.988343] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 18.988388] processor ACPI0007:01: registered as cooling_device2
[ 18.988392] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 18.992293] Marking TSC unstable due to TSC halts in idle
[ 19.004589] CE: hpet increasing min_delta_ns to 15000 nsec
[ 19.004687] CE: hpet increasing min_delta_ns to 22500 nsec
[ 19.006318] thermal LNXTHERM:01: registered as thermal_zone0
[ 19.034641] ACPI: Thermal Zone [THRM] (45 C)
[ 19.410393] usbcore: registered new interface driver usbfs
[ 19.410414] usbcore: registered new interface driver hub
[ 19.410463] usbcore: registered new device driver usb
[ 19.413019] USB Universal Host Controller Interface driver v3.0
[ 19.413059] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.413068] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 19.413072] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 19.413109] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 19.413148] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000090e0
[ 19.420867] usb usb1: configuration #1 chosen from 1 choice
[ 19.420894] hub 1-0:1.0: USB hub found
[ 19.420899] hub 1-0:1.0: 2 ports detected
[ 19.524932] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 19.524955] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 19.524964] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 19.524987] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 19.525104] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000090c0
[ 19.525224] usb usb2: configuration #1 chosen from 1 choice
[ 19.525249] hub 2-0:1.0: USB hub found
[ 19.525255] hub 2-0:1.0: 2 ports detected
[ 19.554809] No dock devices found.
[ 19.585243] SCSI subsystem initialized
[ 19.601821] libata version 3.00 loaded.
[ 19.629269] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 19.629290] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 19.629300] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 19.629324] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 19.633348] ehci_hcd 0000:00:1a.7: debug port 1
[ 19.633379] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 19.633404] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdf304c00
[ 19.648577] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 19.648676] usb usb3: configuration #1 chosen from 1 choice
[ 19.648702] hub 3-0:1.0: USB hub found
[ 19.648709] hub 3-0:1.0: 4 ports detected
[ 19.753478] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 19.753498] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 19.753507] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 19.753530] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 19.753625] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000090a0
[ 19.753741] usb usb4: configuration #1 chosen from 1 choice
[ 19.753765] hub 4-0:1.0: USB hub found
[ 19.753772] hub 4-0:1.0: 2 ports detected
[ 19.856880] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 19.856890] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 19.856898] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 19.856928] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 19.857011] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00009080
[ 19.857118] usb usb5: configuration #1 chosen from 1 choice
[ 19.857144] hub 5-0:1.0: USB hub found
[ 19.857150] hub 5-0:1.0: 2 ports detected
[ 19.960880] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 19.960889] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 19.960898] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 19.960920] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 19.960995] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009060
[ 19.961104] usb usb6: configuration #1 chosen from 1 choice
[ 19.961129] hub 6-0:1.0: USB hub found
[ 19.961135] hub 6-0:1.0: 2 ports detected
[ 20.168964] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 20.168989] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 20.168998] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 20.169023] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 20.169163] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009040
[ 20.169287] usb usb7: configuration #1 chosen from 1 choice
[ 20.169316] hub 7-0:1.0: USB hub found
[ 20.169321] hub 7-0:1.0: 2 ports detected
[ 20.280056] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 20.376840] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 20.376854] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 20.376858] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 20.376880] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 20.380796] ehci_hcd 0000:00:1d.7: debug port 1
[ 20.380803] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 20.380808] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf304800
[ 20.408054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.408151] usb usb8: configuration #1 chosen from 1 choice
[ 20.408177] hub 8-0:1.0: USB hub found
[ 20.408183] hub 8-0:1.0: 8 ports detected
[ 20.500574] Clocksource tsc unstable (delta = -134300722 ns)
[ 20.745266] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 20.745281] r8169 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 20.745315] r8169 0000:05:00.0: setting latency timer to 64
[ 20.745945] eth0: RTL8168c/8111c at 0xf8844000, 00:1e:ec:ac:a9:f6, XID 3c2000c0 IRQ 216
[ 20.747970] ohci1394 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.747988] ohci1394 0000:06:00.0: setting latency timer to 64
[ 20.799842] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[da100000-da1007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 20.805034] ahci 0000:00:1f.2: version 3.0
[ 20.805073] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 20.805609] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 20.805613] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
[ 20.805626] ahci 0000:00:1f.2: setting latency timer to 64
[ 20.816466] scsi0 : ahci
[ 20.816954] scsi1 : ahci
[ 20.817061] scsi2 : ahci
[ 20.822693] scsi3 : ahci
[ 20.822825] scsi4 : ahci
[ 20.822950] scsi5 : ahci
[ 20.823137] ata1: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304100 irq 215
[ 20.823145] ata2: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304180 irq 215
[ 20.823147] ata3: DUMMY
[ 20.823149] ata4: DUMMY
[ 20.823154] ata5: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304300 irq 215
[ 20.823163] ata6: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304380 irq 215
[ 20.948055] usb 6-1: device not accepting address 2, error -71
[ 21.004089] hub 6-0:1.0: unable to enumerate USB device on port 1
[ 21.244030] usb 8-5: new high speed USB device using ehci_hcd and address 2
[ 21.308055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 21.309623] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 21.309843] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 21.310062] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
[ 21.310066] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 21.310279] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 21.310500] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 21.311258] ata1.00: ATA-8: Hitachi HTS542525K9A300, BBFOC3MP, max UDMA/100
[ 21.311262] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 21.313041] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 21.313291] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 21.313295] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 21.313518] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 21.313732] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 21.313748] ata1.00: configured for UDMA/100
[ 21.383198] usb 8-5: configuration #1 chosen from 1 choice
[ 21.656060] ata2: SATA link down (SStatus 0 SControl 300)
[ 21.720052] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 21.888538] usb 7-1: configuration #1 chosen from 1 choice
[ 21.904858] usbcore: registered new interface driver hiddev
[ 21.917490] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb7/7-1/7-1:1.0/input/input2
[ 21.917598] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.3-1
[ 21.917613] usbcore: registered new interface driver usbhid
[ 21.917616] usbhid: v2.6:USB HID core driver
[ 22.092213] ieee1394: Host added: ID:BUS[0-00:1023] GUID[893f0200265040d9]
[ 22.156062] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 22.158946] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.159052] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.159208] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.159211] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 22.159338] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.159491] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.159497] ata5.00: ATAPI: Optiarc BD ROM BC-5500S, 1.83, max UDMA/100
[ 22.162495] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.162622] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.162784] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.162788] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 22.162908] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.163075] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 22.163090] ata5.00: configured for UDMA/100
[ 22.496116] ata6: SATA link down (SStatus 0 SControl 300)
[ 22.512222] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 22.513232] scsi 4:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.83 PQ: 0 ANSI: 5
[ 22.520928] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.520962] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 22.536435] Driver 'sd' needs updating - please use bus_type methods
[ 22.536545] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 22.536566] sd 0:0:0:0: [sda] Write Protect is off
[ 22.536569] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.536604] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.536680] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 22.536699] sd 0:0:0:0: [sda] Write Protect is off
[ 22.536702] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.536738] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.536743] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 22.856872] sda1 sda2 sda3 < sda5 sda6 >
[ 22.900555] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.904307] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 22.904310] Uniform CD-ROM driver Revision: 3.20
[ 22.904384] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 23.664727] loop: module loaded
[ 23.704382] kjournald starting. Commit interval 5 seconds
[ 23.704412] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.073520] udevd version 124 started
[ 30.618682] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.645816] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.735109] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 30.756027] ACPI: Power Button (FF) [PWRF]
[ 30.756125] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 30.788035] ACPI: Power Button (CM) [PWRB]
[ 30.788126] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 30.788236] ACPI: Lid Switch [LID0]
[ 30.788298] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 30.816029] ACPI: Sleep Button (CM) [SLPB]
[ 30.925913] Linux agpgart interface v0.103
[ 30.948176] ACPI: AC Adapter [AC] (on-line)
[ 31.064099] ACPI: Battery Slot [BAT0] (battery absent)
[ 31.064498] ACPI: WMI: Mapper loaded
[ 31.247802] acpi device:04: registered as cooling_device3
[ 31.248285] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input7
[ 31.264549] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 31.295635] acpi device:09: registered as cooling_device4
[ 31.296036] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/device:08/input/input8
[ 31.312563] ACPI: Video Device [EVGA] (multi-head: yes rom: no post: no)
[ 31.795635] nvidia: module license 'NVIDIA' taints kernel.
[ 32.104214] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.104234] nvidia 0000:01:00.0: setting latency timer to 64
[ 32.132852] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.12 Thu Jul 17 18:11:36 PDT 2008
[ 32.248703] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 32.250427] sdhci: Secure Digital Host Controller Interface driver
[ 32.250429] sdhci: Copyright(c) Pierre Ossman
[ 32.254603] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 32.254625] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.254660] sdhci-pci 0000:06:00.1: setting latency timer to 64
[ 32.254713] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[ 32.254723] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 32.254740] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.254748] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 32.254756] sdhci-pci 0000:06:00.2: PCI INT A disabled
[ 32.331942] Linux video capture interface: v2.00
[ 32.427665] uvcvideo: Found UVC 1.00 device HP Webcam (090c:c371)
[ 32.429626] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb8/8-5/8-5:1.0/input/input10
[ 32.476161] usbcore: registered new interface driver uvcvideo
[ 32.476166] USB Video Class driver (v0.1.0)
[ 33.028615] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 33.028626] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 33.028653] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 33.122859] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 33.122862] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 33.614987] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000
[ 33.745573] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 34.064508] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 34.177491] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 34.177528] iwlagn 0000:02:00.0: setting latency timer to 64
[ 34.177619] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 34.207202] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 34.207691] iwlagn 0000:02:00.0: PCI INT A disabled
[ 34.208220] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 35.036464] lp: driver loaded but no devices found
[ 35.952059] EXT3 FS on loop0, internal journal
[ 50.657850] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 51.194925] type=1505 audit(1227356226.306:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4563
[ 51.349953] type=1505 audit(1227356226.462:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4568
[ 51.350140] type=1505 audit(1227356226.462:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4568
[ 51.538270] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 53.104834] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 53.165177] apm: BIOS not found.
[ 53.341880] ppdev: user-space parallel port driver
[ 55.898903] Bluetooth: Core ver 2.13
[ 55.900591] NET: Registered protocol family 31
[ 55.900602] Bluetooth: HCI device and connection manager initialized
[ 55.900609] Bluetooth: HCI socket layer initialized
[ 55.950431] Bluetooth: L2CAP ver 2.11
[ 55.950446] Bluetooth: L2CAP socket layer initialized
[ 56.027393] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 56.027406] Bluetooth: BNEP filters: protocol multicast
[ 56.091965] Bridge firewalling registered
[ 56.093592] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 56.130542] Bluetooth: RFCOMM socket layer initialized
[ 56.131035] Bluetooth: RFCOMM TTY layer initialized
[ 56.131049] Bluetooth: RFCOMM ver 1.10
[ 56.152187] Bluetooth: SCO (Voice Link) ver 0.6
[ 56.152201] Bluetooth: SCO socket layer initialized
[ 60.420543] r8169: eth0: link down
[ 60.421718] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 60.422017] iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[ 60.422558] firmware: requesting iwlwifi-5000-1.ucode
[ 63.106728] Registered led device: iwl-phy0:radio
[ 63.106754] Registered led device: iwl-phy0:assoc
[ 63.106775] Registered led device: iwl-phy0:RX
[ 63.106793] Registered led device: iwl-phy0:TX
[ 63.827177] NET: Registered protocol family 17
[ 104.853503] CPU0 attaching NULL sched-domain.
[ 104.853514] CPU1 attaching NULL sched-domain.
[ 104.864570] CPU0 attaching sched-domain:
[ 104.864576] domain 0: span 0-1 level MC
[ 104.864579] groups: 0 1
[ 104.864587] CPU1 attaching sched-domain:
[ 104.864588] domain 0: span 0-1 level MC
[ 104.864591] groups: 1 0
[ 104.981119] wlan0: authenticate with AP 00:05:59:07:1b:f7
[ 104.982853] wlan0: authenticated
[ 104.982860] wlan0: associate with AP 00:05:59:07:1b:f7
[ 104.988011] wlan0: RX AssocResp from 00:05:59:07:1b:f7 (capab=0x471 status=0 aid=1)
[ 104.988017] wlan0: associated
[ 105.155536] padlock: VIA PadLock not detected.
[ 106.329578] NET: Registered protocol family 10
[ 106.418369] lo: Disabled Privacy Extensions
[ 106.418961] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 116.972532] wlan0: no IPv6 routers present
[ 126.487794] canberra-gtk-pl[6090]: segfault at 4ea773f0 ip b712b84d sp b6ec8f10 error 6 in libpulse.so.0.4.1[b70ec000+4e000]
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.